STARTER DISASSEMBLY


  1. REMOVE MAGNET STARTER SWITCH ASSEMBLY


    1. A01EPSP

      Remove the nut, and disconnect the lead wire from the terminal C.

    2. A01EPQS

      Remove the 2 nuts and magnet starter switch.

  2. REMOVE STARTER DRIVE HOUSING ASSEMBLY


    1. A01EPDM

      Using a T30 "TORX" socket wrench, remove the 2 bolts.

    2. Pull out the starter yoke and the starter commutator end frame together with the starter armature.

  3. REMOVE STARTER COMMUTATOR END FRAME ASSEMBLY


    1. A01ERL6

      Remove the starter pinion drive lever.

    2. A01ERC2

      Remove the 2 screws and end frame.

      Note

      While holding down the lead wire, remove the starter commutator end frame.

  4. REMOVE STARTER ARMATURE ASSEMBLY


    1. A01EPWQE02

      Using a screwdriver, hold the spring back and disconnect the brush from the starter brush holder.

    2. Disconnect the 4 brushes and remove the starter brush holder.

    3. A01EQZ0

      Remove the starter armature from the starter yoke.

  5. REMOVE STARTER YOKE ASSEMBLY


    1. Remove the starter yoke from the starter center bearing clutch.

  6. REMOVE STARTER ARMATURE PLATE


    1. A01EP6A

      Remove the starter armature plate from the starter center bearing clutch.

  7. REMOVE PLANETARY GEAR


    1. A01EQQ4

      Remove the 3 planetary gears.