STARTER REMOVAL


  1. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY RH


    1. Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note


    • w/ Navigation System:

      After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.

    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE STARTER COVER


    1. A01EN4B

      Remove the 3 bolts and starter cover.

  4. REMOVE STARTER ASSEMBLY


    1. A01ENFD

      Disconnect the starter connector.

    2. Remove the nut and disconnect the starter wire.

    3. A01ESC0

      Remove the 2 bolts and starter.

    4. A01EPSA

      Remove the flywheel housing side cover.