STARTER INSTALLATION


  1. INSTALL STARTER ASSEMBLY


    1. Install the flywheel housing side cover.

    2. Install the starter with the 2 bolts.

      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }

    3. Install the starter wire with the nut.

      Torque:
      9.8 N*m  { 100 kgf*cm, 87 in.*lbf }

    4. Connect the starter connector.

  2. INSTALL STARTER COVER


    1. Install the starter cover with the 3 bolts.

      Torque:
      12 N*m  { 117 kgf*cm, 8 ft.*lbf }

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. INSTALL EXHAUST MANIFOLD SUB-ASSEMBLY RH

    Click here