AIR INJECTION DRIVER (w/ Secondary Air Injection System) INSTALLATION


  1. INSTALL AIR INJECTION CONTROL DRIVER ASSEMBLY


    1. A01EQ8M

      Install the air injection control driver with the 3 bolts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }
    2. A01EP4U

      Connect the 4 air injection control driver connectors.

    3. A01EOT0

      Connect the wire harness clamp.

    4. Connect the ground wire with the bolt.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

  2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable from the cable is reconnected Click here.

  3. INSTALL ENGINE ROOM SIDE COVER LH


    1. Install the engine room side cover LH with the 7 clips.