AIR INJECTION DRIVER (w/ Secondary Air Injection System) REMOVAL


  1. REMOVE ENGINE ROOM SIDE COVER LH


    1. Remove the 7 clips and engine room side cover LH.

      A01EN5SE01

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note


    • w/ Navigation System:

      After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.

    • When disconnecting the cable, some systems need to be initialized after the cable from the cable is reconnected Click here.

  3. REMOVE AIR INJECTION CONTROL DRIVER ASSEMBLY


    1. A01EOT0

      Remove the bolt and disconnect the ground wire.

    2. Disconnect the wire harness clamp.

    3. A01EP4U

      Disconnect the 4 air injection control driver connectors.

    4. A01EQ8M

      Remove the 3 bolts and air injection control driver.