AIR INJECTION DRIVER INSTALLATION


  1. INSTALL AIR INJECTION CONTROL DRIVER ASSEMBLY


    1. Install the air injection control driver assembly with the 3 bolts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

    2. Connect the wire harness with the bolt.

      Torque:
      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

    3. Attach the wire harness clamp.

    4. Connect the 2 connectors

  2. INSTALL ENGINE ROOM SIDE COVER LH


    1. Install the engine room side cover LH with the 7 clips.