FUEL PUMP INSTALLATION


  1. INSTALL FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY


    1. Apply a light coat of gasoline or grease to a new gasket, and install it to the fuel tank.

    2. A01EOQTE01

      Install the fuel suction with pump and gauge tube into the fuel tank.

      Note

      Be careful not to bend the arm of the fuel sender gauge.

      Tech Tips

      Align the protrusion of the fuel suction with pump and gauge tube with the groove of the fuel tank.

    3. Put the retainer on the fuel tank. While holding the fuel suction with pump and gauge tube, tighten the retainer 1 complete turn by hand.

    4. A01ENUNE01

      Set SST on the retainer.

      SST
      09808-14030

      Tech Tips


      • Hold the fuel suction tube assembly upright by hand to ensure that the fuel suction tube gasket is not moved out of position.

      • Engage the claws of SST securely with the fuel pump gauge retainer holes to secure SST.

      • Install SST while pressing the claws of SST against the fuel pump gauge retainer (toward the center of SST).

    5. A01ES6EE01

      Using SST, tighten the retainer until the mark on the retainer is within range A on the fuel tank, as shown in the illustration.

      SST
      09808-14030

      Tech Tips

      Fit the tips of SST onto the ribs of the retainer.

  2. INSTALL FUEL TANK SUB-ASSEMBLY


    1. Install the fuel tank sub-assembly Click here.