FUEL PUMP DISASSEMBLY

Note

Do not disconnect the hoses indicated in the illustration.

A01EONPE01

  1. REMOVE FUEL SENDER GAUGE ASSEMBLY


    1. A01ES72

      Disconnect the fuel sender gauge connector.

    2. A01ER7VE01

      Press down on the sender gauge claw labeled A. Then slide the sender gauge upward to remove it.

  2. REMOVE NO. 1 FUEL SUB-TANK (for Single Tank Type)


    1. A01ES6I

      Disconnect the fuel pump connector.

    2. A01EQFJE01

      Disconnect the jet pump from the sub-tank.

    3. Using a small screwdriver, detach the claw from the sub-tank.

      Tech Tips

      Tape the screwdriver tip before use.

    4. Detach the tube from the 2 clamps on the sub-tank.

    5. A01EQ1E

      Using a screwdriver, detach the 3 claws from the claw holes.

      Note

      Do not damage the fuel sub-tank.

      Tech Tips

      Tape the screwdriver tip before use.

    6. A01EOYE

      Using a screwdriver, detach the 3 claws from the claw holes and remove the No. 1 fuel sub-tank.

      Note

      Do not damage the fuel sub-tank.

      Tech Tips

      Tape the screwdriver tip before use.

  3. REMOVE NO. 1 FUEL SUB-TANK (for Double Tank Type)


    1. A01ES6I

      Disconnect the fuel pump connector.

    2. A01ESA3E01

      Disconnect the jet pump (labeled A) from the sub-tank.

    3. Disconnect the jet pump (labeled B) from the sub-tank.


      1. Using a small screwdriver, detach the claw from the sub-tank.

        Tech Tips

        Tape the screwdriver tip before use.

    4. A01EQXI

      Using a screwdriver, detach the 3 claws from the claw holes.

      Note

      Do not damage the fuel sub-tank.

      Tech Tips

      Tape the screwdriver tip before use.

    5. A01EOYE

      Using a screwdriver, detach the 3 claws from the claw holes.

      Note

      Do not damage the fuel sub-tank.

      Tech Tips

      Tape the screwdriver tip before use.

  4. REMOVE FUEL PUMP


    1. A01EQUQE01

      Using a screwdriver, detach the 5 claws from the claw holes and disconnect the fuel pump from the fuel filter case.

      Tech Tips

      Tape the screwdriver tip before use.

    2. A01EOB7

      Disconnect the fuel pump wire harness connector from the fuel pump to remove it.

    3. A01EOO3E01

      Remove the O-ring and spacer from the fuel pump.

  5. REMOVE FUEL MAIN VALVE ASSEMBLY


    1. A01ENRWE01

      Remove the fuel main valve from the fuel filter case.

    2. Remove the 2 O-rings from the fuel main valve.

  6. REMOVE NO. 1 FUEL SUCTION SUPPORT


    1. A01EQR7

      Detach the 2 claws from the claw holes to remove the fuel suction support.