FUEL PUMP DISASSEMBLY

Note

Do not disconnect the hoses indicated in the illustration.

A01EP3F

  1. REMOVE FUEL SENDER GAUGE ASSEMBLY


    1. A01ES72

      Disconnect the fuel sender gauge connector.

    2. A01ER7VE03

      Press down on the sender gauge claw labeled A. Then slide the sender gauge upward to remove it.

      Text in Illustration
      A01EO1M Press Down
      A01ER4J Slide

  2. REMOVE NO. 1 FUEL SUB-TANK


    1. A01ES6I

      Disconnect the fuel pump connector.

    2. A01ESA3E03
      Text in Illustration
      *1 Jet Pump

      Disconnect the jet pump (labeled A) from the No. 1 fuel sub-tank.

    3. Disconnect the jet pump (labeled B) from the No. 1 fuel sub-tank.


      1. Using a small screwdriver, detach the claw from the No. 1 fuel sub-tank.

        Tech Tips

        Tape the screwdriver tip before use.

    4. A01EQXI

      Using a screwdriver, detach the 3 claws from the claw holes.

      Note

      Do not damage the No. 1 fuel sub-tank.

      Tech Tips

      Tape the screwdriver tip before use.

    5. A01EOYE

      Using a screwdriver, detach the 3 claws from the claw holes.

      Note

      Do not damage the No. 1 fuel sub-tank.

      Tech Tips

      Tape the screwdriver tip before use.

  3. REMOVE FUEL PUMP


    1. A01EQUQE03
      Text in Illustration
      *1 Fuel Filter Case

      Using a screwdriver, detach the 5 claws from the claw holes and disconnect the fuel pump from the fuel filter case.

      Tech Tips

      Tape the screwdriver tip before use.

    2. A01EOB7

      Disconnect the fuel pump wire harness connector from the fuel pump to remove it.

    3. A01EOO3E02
      Text in Illustration
      *1 O-Ring
      *2 Spacer

      Remove the O-ring and spacer from the fuel pump.

  4. REMOVE FUEL MAIN VALVE ASSEMBLY


    1. A01ENRWE02
      Text in Illustration
      *1 Fuel Filter Case
      *2 O-Ring

      Remove the fuel main valve from the fuel filter case.

    2. Remove the 2 O-rings from the fuel main valve.

  5. REMOVE NO. 1 FUEL SUCTION SUPPORT


    1. A01EQR7

      Detach the 2 claws from the claw holes to remove the fuel suction support.