POWER STEERING OIL PRESSURE SWITCH REMOVAL


  1. REMOVE FRONT WHEEL

  2. REMOVE FRONT FENDER APRON TRIM PACKING A


    1. A01EO1I

      Remove the 3 clips and front fender apron trim packing A.

  3. REMOVE FRONT HEIGHT CONTROL SENSOR SUB-ASSEMBLY RH


    1. A01EQJ4

      Disconnect the connector.

    2. Remove the nut, bolt and front height control sensor sub-assembly RH.

  4. DRAIN POWER STEERING FLUID

  5. REMOVE POWER STEERING OIL PRESSURE SWITCH


    1. A01EOKY

      Disconnect the power steering oil pressure switch connector.

    2. Using a 24 mm deep socket wrench, remove the power steering oil pressure switch.

    3. Remove the O-ring from the power steering oil pressure switch.