KNOCK SENSOR INSTALLATION


  1. INSTALL KNOCK SENSOR


    1. A01EQ66E01
      Text in Illustration
      *A for Bank 2 Sensor 1
      *B for Bank 1 Sensor 1
      *C for Bank 2 Sensor 2
      *D for Bank 1 Sensor 2
      A01ER4J Front
      A01EOT4 Upper Side
      A01EQTS Rear

      Install the 4 knock sensors with the 4 bolts so that the knock sensors are angled as shown in the illustration.

      Torque:
      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

    2. Connect the 4 knock sensor connectors.

  2. INSTALL NO. 1 ENGINE COVER

  3. INSTALL NO. 2 ENGINE COVER

  4. INSTALL SEPARATOR CASE


    1. Install the separator case with the 4 bolts.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

  5. INSTALL NO. 3 ENGINE COVER


    1. A01EPM8

      Install the No. 3 engine cover.

      Text in Illustration
      A01EO1M Engine Front

      Tech Tips

      Position the No. 3 engine cover so that the arrow mark faces the front of the engine and install it.

  6. INSTALL NO. 4 ENGINE COVER


    1. A01ESNX

      Install the No. 4 engine cover.

      Text in Illustration
      A01EO1M Engine Front

      Tech Tips

      Position the No. 4 engine cover so that the arrow mark faces the front of the engine and install it.

  7. INSTALL NO. 1 EGR PIPE BRACKET


    1. Install the No. 1 EGR pipe bracket with the 3 bolts.

      Torque:
      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

  8. INSTALL NO. 1 WATER OUTLET PIPE


    1. Install the No. 1 water outlet pipe with the 2 bolts.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

  9. CONNECT NO. 11 WATER BY-PASS HOSE


    1. A01ERYAE01
      Text in Illustration
      *1 Paint Mark
      *a Upper Side

      Connect the No. 11 water by-pass hose.

      Tech Tips

      The direction of the hose clamp is indicated in the illustration.

  10. CONNECT NO. 8 WATER BY-PASS HOSE


    1. A01EPISE01
      Text in Illustration
      *1 Paint Mark
      *a Upper Side
      *b Front

      Install the No. 8 water by-pass hose.

      Tech Tips


      • When connecting the hose, make sure the paint marks and clips are as shown in the illustration.

      • The direction of each hose clamp is indicated in the illustration.

  11. INSTALL NO. 2 WATER BY-PASS PIPE


    1. A01EQWUE01
      Text in Illustration
      *1 Paint Mark
      *a Upper Side

      Install the No. 2 water by-pass pipe with the 2 bolts and connect the hose.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Tech Tips


      • When connecting the hose, make sure the paint marks and clips are as shown in the illustration.

      • The direction of each hose clamp is indicated in the illustration.

  12. INSTALL INTAKE MANIFOLD

    Click here