CAMSHAFT OIL CONTROL VALVE REMOVAL


  1. REMOVE ENGINE ROOM SIDE COVER LH


    1. Remove the 7 clips and engine room side cover LH.

      A01EN5SE01

  2. REMOVE ENGINE ROOM SIDE COVER RH


    1. Remove the 7 clips and engine room side cover RH.

      A01EPFTE01

  3. REMOVE UPPER RADIATOR SUPPORT SEAL


    1. A01ENLH

      Remove the 3 clips and upper radiator support seal.

  4. REMOVE V-BANK COVER SUB-ASSEMBLY


    1. A01EO82E01
      Text in Illustration
      *1 Grommet
      *2 Pin
      *3 Hook
      *4 Bracket

      Raise the front of the V-bank cover to detach the 3 pins. Then remove the 2 V-bank cover hooks from the bracket, and remove the V-bank cover.

  5. REMOVE AIR CLEANER CAP AND HOSE


    1. A01ERFI

      Disconnect the No. 2 PCV hose and No. 1 air hose.

    2. Disconnect the mass air flow meter connector and detach the clamp.

    3. Detach the 4 clamps.

    4. Loosen the hose clamp and remove the air cleaner cap and hose.

  6. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Exhaust Side of Bank 1)


    1. A01ENHH

      Disconnect the camshaft timing oil control valve connector.

    2. Remove the bolt and camshaft timing oil control valve.

    3. Remove the O-ring from the camshaft timing oil control valve.

  7. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Intake Side of Bank 1)


    1. A01EO4Y

      Disconnect the camshaft timing oil control valve connector.

    2. Remove the bolt and camshaft timing oil control valve.

    3. Remove the O-ring from the camshaft timing oil control valve.

  8. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Intake Side of Bank 2)


    1. A01ENVU

      Disconnect the throttle body connector and detach the clamp.

    2. A01EQP0

      Remove the hose clamp, bolt and air pipe.

    3. A01ES8U

      Disconnect the camshaft timing oil control valve connector.

    4. Remove the bolt and camshaft timing oil control valve.

    5. Remove the O-ring from the camshaft timing oil control valve.

  9. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Exhaust Side of Bank 2)


    1. A01EQ0K

      Disconnect the camshaft timing oil control valve connector.

    2. Remove the bolt and camshaft timing oil control valve.

    3. Remove the O-ring from the camshaft timing oil control valve.