ACCELERATOR PEDAL REMOVAL


  1. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. A01ERF3

      Remove the 2 screws.

    2. Detach the 3 claws.

    3. Remove the under cover and disconnect the connectors.

  2. REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY

    Note

    This accelerator pedal does not require lubrication.

    Do not apply oil or other lubrication to the accelerator pedal sensor assembly.

    If applied, the accelerator pedal sensor assembly must be replaced.


    1. A01EQQ1

      Disconnect the accelerator pedal position sensor connector.

    2. Remove the 2 nuts and accelerator pedal sensor.