THROTTLE BODY INSPECTION


  1. INSPECT THROTTLE BODY WITH MOTOR ASSEMBLY


    1. Check the throttle valve.


      1. Check that the throttle valve opens and closes smoothly.

      2. Check that there is no sludge accumulating around the throttle body with motor assembly.

    2. Check the throttle control motor.


      1. A01ESM8E03
        Text in Illustration
        *a

        Component without harness connected

        (Throttle Body with Motor Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 (M-) - 2 (M+) 20°C (68°F) 0.3 to 100 Ω

        If the result is not as specified, replace the throttle body with motor assembly.