ABSORBER CONTROL SWITCH INSTALLATION


  1. INSTALL INTEGRATION CONTROL AND PANEL SUB-ASSEMBLY (ABSORBER CONTROL SWITCH)

    A01EPT2E01

    1. Install the integration control and panel to the position indicator housing with the 5 screws.

    2. Connect the connector.

  2. INSTALL LOWER POSITION INDICATOR HOUSING

    A01ERTB

    1. Install the lower position indicator housing to the position indicator housing with the 4 screws.

  3. INSTALL POSITION INDICATOR HOUSING ASSEMBLY

    A01EP4H

    1. Attach the 7 claws to install the position indicator housing.

    2. Connect the 2 connectors.

  4. INSTALL CONSOLE CUP HOLDER BOX SUB-ASSEMBLY


    1. A01EPMF

      Attach the 4 claws to install the box.

  5. INSTALL PARKING BRAKE HOLE COVER


    1. A01EOWR

      Attach the 6 claws to install the cover.

  6. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


    1. A01EN46

      Install the shift lever knob and twist it in the direction indicated by the arrow.

  7. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH


    1. A01EO0Q

      Connect the connector.

    2. Attach the 8 claws to install the panel pad.