HEIGHT CONTROL SENSOR (for Rear Side) REMOVAL


  1. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE REAR WHEEL

  4. REMOVE REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH


    1. A01ERBU

      Disconnect the connector and 2 clamps.

    2. A01EQED

      Remove the 2 bolts, nut and sensor.

  5. REMOVE REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY RH


    1. A01ERZN

      Disconnect the connector and 2 clamps.

    2. A01ER6E

      Remove the 2 bolts, nut and sensor.