ACTIVE HEIGHT CONTROL PUMP AND MOTOR REASSEMBLY


  1. INSTALL NO. 1 HEIGHT CONTROL BOLT CUSHION


    1. Install the 3 bolt cushions and 3 bolt holders to the pump and motor.

  2. INSTALL HEIGHT CONTROL RESERVOIR ASSEMBLY


    1. A01EODH

      Using a 5 mm hexagon wrench, install the reservoir with the 5 bolts.

      Torque:
      5.6 N*m  { 57 kgf*cm, 50 in.*lbf }

  3. INSTALL HEIGHT CONTROL COMPRESSOR BRACKET ASSEMBLY


    1. A01ER0J

      Install the bracket with the 3 nuts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

  4. CONNECT NO. 4 FRAME WIRE


    1. A01EOK3

      Connect the 2 connectors, clamp and frame wire.

  5. INSTALL HEIGHT CONTROL CAP TO RESERVOIR HOSE


    1. A01ERWC

      Install the hose to the reservoir tank, and push the connector up to attach it.

    2. A01ENNPE01

      Install the hose, 2 breather plugs and 3 clips to the reservoir hose.

  6. INSTALL HEIGHT CONTROL HOSE ASSEMBLY


    1. A01EO51E01

      Install the hose to the reservoir and motor with the 2 clips.

    2. Connect the clamp to the reservoir.

    3. A01ESKAE02

      Check that the direction of the hose clip is as shown in the illustration.