REAR DIFFERENTIAL CARRIER ASSEMBLY INSTALLATION


  1. INSTALL REAR DIFFERENTIAL CARRIER ASSEMBLY


    1. Install a new gasket.

    2. A01EQC1

      Install the differential carrier with the 10 washers and 10 nuts.

      Torque:
      72 N*m  { 734 kgf*cm, 53 ft.*lbf }

  2. CONNECT PROPELLER SHAFT ASSEMBLY


    1. A01EOZIE01

      Align the matchmarks on the propeller shaft flange and differential flange.

    2. Connect the propeller shaft with the 4 bolts, 4 washers and 4 nuts.

      Torque:
      88 N*m  { 900 kgf*cm, 65 ft.*lbf }

  3. INSTALL REAR AXLE SHAFT


    1. Install the axle shaft Click here.

  4. ADD DIFFERENTIAL OIL


    1. A01ERKXE27

      Add differential oil so that the oil level is between 0 to 5 mm (0 to 0.196 in.) from the bottom lip of the differential filler plug hole.

      Note


      • Too much or too little oil will lead to differential problems.

      • After changing the oil, drive the vehicle and then check the oil level again.

      Differential oil type and viscosity
      Toyota Genuine Differential gear oil LT 75W-85 GL-5 or equivalent
      Differential Oil Capacity
      Item Specified Condition
      Front Differential 1.85 to 1.95 liters (1.96 to 2.06 US qts., 1.63 to 1.71 Imp. qts.)
      Rear Differential 4.15 to 4.25 liters (4.39 to 4.49 US qts., 3.66 to 3.74 Imp. qts.)

    2. Front Differential:


      1. Using a 10 mm hexagon wrench, install a new gasket and the filler plug.

        Torque:
        39 N*m  { 400 kgf*cm, 29 ft.*lbf }

      2. Install the engine under cover Click here.

    3. Rear Differential:


      1. Install a new gasket and the filler plug.

        Torque:
        49 N*m  { 500 kgf*cm, 36 ft.*lbf }