FRONT AXLE HUB REMOVAL

Tech Tips


  • Use the same procedures for the LH side and RH side.

  • The procedures listed below are for the LH side.


  1. REMOVE FRONT WHEEL

  2. DISCONNECT FRONT DISC BRAKE CALIPER ASSEMBLY LH


    1. A01ENEO

      Remove the bolt and nut, and disconnect the brake tube bracket from the steering knuckle.

    2. A01EOKP

      Remove the 2 bolts and disconnect the disc brake caliper from the steering knuckle.

      Note


      • Do not disconnect the flexible hose from the disc brake caliper.

      • Do not twist or bend the flexible hose.

  3. REMOVE FRONT DISC


    1. A01ESBCE01

      Put matchmarks on the front disc and the axle hub if planning to reuse the disc.

    2. Remove the front disc.

  4. REMOVE FRONT AXLE HUB GREASE CAP LH


    1. A01ESO7

      Using a screwdriver and hammer, remove the axle hub grease cap.

      Note

      Do not damage the axle hub.

  5. REMOVE FRONT AXLE SHAFT NUT LH


    1. A01EP6N

      Remove the cotter pin and adjusting lock cap.

    2. A01ERUQ

      Using a 39 mm socket wrench, remove the axle hub nut.

  6. REMOVE FRONT AXLE HUB SUB-ASSEMBLY LH


    1. A01EQFW

      Remove the 4 bolts.

    2. A01EPLIE01

      Using SST, remove the front axle hub together with the dust cover.

      SST
      09950-40011   ( 09951-04020, 09952-04010, 09953-04020, 09954-04010, 09955-04061, 09957-04010, 09958-04011 )

    3. Remove the O-ring.