FRONT PROPELLER SHAFT ASSEMBLY REMOVAL


  1. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH


    1. A01EQP2

      Remove the 3 bolts and 2 screws.

    2. Turn the clip indicated by the arrow in the illustration to remove the front fender splash shield sub-assembly LH.

  2. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  3. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY


    1. A01EN7K

      Remove the 10 bolts and No. 1 engine under cover.

  4. REMOVE NO. 2 ENGINE UNDER COVER


    1. A01ERKF

      Remove the 2 bolts and No. 2 engine under cover.

  5. REMOVE PROPELLER SHAFT HEAT INSULATOR


    1. A01EOR8

      Remove the 2 bolts and insulator.

  6. REMOVE FRONT PROPELLER SHAFT ASSEMBLY


    1. A01EPMME01

      for Transfer Side:


      1. Place matchmarks on the propeller shaft flange and transfer flange.

      2. Remove the 4 nuts and 4 washers.

    2. A01ESLLE01

      for Differential Side:


      1. Place matchmarks on the propeller shaft flange and differential flange.

      2. Remove the 4 nuts and 4 washers.

    3. Remove the front propeller shaft.