4WD CONTROL SWITCH INSTALLATION


  1. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY (4WD CONTROL SWITCH)

    A01EPT2E01

    1. Install the control panel with the 5 screws.

    2. Connect the connector.

  2. INSTALL LOWER POSITION INDICATOR HOUSING

    A01ERTB

    1. Install the lower position indicator housing to the position indicator housing with the 4 screws.

  3. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY


    1. A01ENG7

      Connect the connectors.

    2. Attach the 13 claws to install the console panel.

  4. INSTALL CONSOLE CUP HOLDER BOX SUB-ASSEMBLY


    1. A01EPMF

      Attach the 4 claws to install the box.

  5. INSTALL PARKING BRAKE HOLE COVER


    1. A01EOWR

      Attach the 6 claws to install the cover.

  6. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    1. A01EQSF

      Connect the connectors.

    2. Attach the 8 claws to install the panel.

  7. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


    1. A01EN46

      Install the shift lever knob and twist it in the direction indicated by the arrow.

  8. INSTALL INNER NO. 1 INSTRUMENT PANEL BRACKET COVER RH


    1. A01EO0O

      Attach the clip to install the cover.

  9. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH


    1. A01EP7O

      Attach the 9 claws to install the panel pad.

  10. INSTALL INNER NO. 1 INSTRUMENT PANEL BRACKET COVER LH


    1. A01ER40

      Attach the clip to install the cover.

    2. Install the clip.

  11. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH


    1. A01EO0Q

      Connect the connector.

    2. Attach the 8 claws to install the panel pad.

  12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.