SHIFT LEVER REASSEMBLY


  1. INSTALL SHIFT LOCK CONTROL ECU SUB-ASSEMBLY

    A01EQHV

    1. Attach the 3 claws to install the ECU to the transmission floor shift.

    2. Connect the shift lock solenoid connector.

  2. INSTALL NO. 1 PATTERN SELECT SWITCH ASSEMBLY

    A01EPMP

    1. Install the pattern select switch to the position indicator housing and attach the 2 claws.

  3. INSTALL INTEGRATION CONTROL & PANEL SUB-ASSEMBLY

    A01ERTE

    1. Install the integration control & panel to the position indicator housing with the 5 screws.

  4. INSTALL SHIFT LOCK RELEASE BUTTON

    A01EOEE

    1. Install the spring and shift lock release button to the lower position indicator housing and attach the 2 claws.

  5. INSTALL INDICATOR LIGHT WIRE SUB-ASSEMBLY

    A01EPTQ

    1. Insert the indicator light wire to the position indicator housing and attach the claw.

    2. Attach the indicator light wire connector to the lower position indicator housing.

  6. INSTALL POSITION INDICATOR SLIDE COVER

    A01EQAJ

    1. Install the No. 2 position indicator slide cover to the position indicator slide cover.

    2. Install the position indicator slide cover together with the No. 2 slide cover to the lower position indicator housing.

      Note

      Make sure the protrusions of the position indicator slide cover are facing rearwards.

  7. INSTALL POSITION INDICATOR LENS

    A01EPDJ

    1. Attach the 4 claws to install the position indicator lens to the lower position indicator housing.

  8. INSTALL LOWER POSITION INDICATOR HOUSING

    A01ERTB

    1. Install the lower position indicator housing to the position indicator housing with the 4 screws.

  9. INSTALL CONSOLE BOX POCKET

    A01EP4L

    1. Install the console box pocket to the position indicator housing with the 2 screws.

    2. Attach the integration control & panel connector.

  10. INSTALL SWITCH WIRE

    A01ENBQ

    1. Connect the 5 connectors and attach the 3 clamps to install the switch wire to the position indicator housing.