OIL COOLER REMOVAL


  1. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH


    1. A01EQP2

      Remove the 3 bolts and 2 screws.

    2. Turn the clip indicated by the arrow in the illustration to remove the front fender splash shield sub-assembly LH.

  2. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  3. REMOVE NO. 1 ENGINE UNDER COVER


    1. A01ERKF

      Remove the 2 bolts and No. 2 engine under cover.

  4. REMOVE NO. 2 ENGINE UNDER COVER


    1. A01ERKF

      Remove the 2 bolts and No. 2 engine under cover.

  5. REMOVE FRONT BUMPER ASSEMBLY (w/ Air Cooled Transmission Oil Cooler)


    1. Remove the front bumper Click here.

  6. REMOVE FRONT FENDER APRON SEAL FRONT RH


    1. A01EO1I

      Using a clip remover, remove the 3 clips and fender apron seal.

  7. REMOVE FRONT FENDER APRON SEAL REAR RH


    1. A01EQKU

      Using a clip remover, remove the 4 clips and fender apron seal.

  8. DISCONNECT TRANSMISSION OIL COOLER HOSE (w/ Air Cooled Transmission Oil Cooler)

    A01EQK0

    1. Disconnect the 2 transmission oil cooler hoses.

  9. DISCONNECT TRANSMISSION OIL COOLER HOSE (w/o Air Cooled Transmission Oil Cooler)

    A01EQDP

    1. Remove the bolt and move the water by-pass pipe so that the 2 transmission oil cooler hoses can be disconnected.

    2. Disconnect the 2 transmission oil cooler hoses.

  10. DISCONNECT INLET NO. 1 OIL COOLER HOSE AND OUTLET NO. 1 OIL COOLER HOSE

    A01EPERE01

    1. w/ Air Cooled Transmission Oil Cooler:


      1. Detach the claw to open the flexible hose clamp.

      2. Disconnect the inlet and outlet oil cooler hoses.

    2. w/o Air Cooled Transmission Oil Cooler:


      1. Disconnect the inlet and outlet oil cooler hoses.

  11. DISCONNECT INLET NO. 2 OIL COOLER HOSE AND INLET NO. 3 OIL COOLER HOSE

    A01EPN6E01

    1. Disconnect the 2 inlet oil cooler hoses.

  12. DISCONNECT INLET NO. 4 OIL COOLER HOSE (w/ Air Cooled Transmission Oil Cooler)

    A01EQWR

  13. REMOVE OIL COOLER TUBE

    A01ES2UE01

    1. Remove the 2 bolts and oil cooler tube.

  14. REMOVE TRANSMISSION OIL COOLER AIR DUCT (w/ Air Cooled Transmission Oil Cooler)

    A01EP6I

    1. Remove the 4 bolts and transmission oil cooler air duct.

  15. REMOVE OIL COOLER ASSEMBLY (w/ Air Cooled Transmission Oil Cooler)

    A01EPKC

    1. Remove the 4 bolts and oil cooler.

    2. A01EQ9W

      Remove the 5 bolts and transmission oil cooler air duct.

    3. A01ENPU

      Disconnect the oil cooler inlet hose and outlet hose and remove the tube.