FRONT STABILIZER BAR INSTALLATION


  1. INSTALL NO. 1 FRONT STABILIZER BAR BUSH


    1. A01EN8ZE01

      Install the 2 bushes to the outer side of the bush stoppers on the front stabilizer bar as shown in the illustration.

      Note

      Be sure to install the front No. 1 stabilizer bar bushes so that the cut and bump of each bush faces the under of the vehicle.

  2. INSTALL FRONT STABILIZER BAR


    1. A01EQSLE02

      Set the stabilizer bracket so that the arrow mark is facing the front side of the vehicle.

    2. A01ER4Q

      Temporarily install the 2 stabilizer brackets and front stabilizer bar with the 4 bolts.

  3. TEMPORARILY INSTALL FRONT STABILIZER LINK ASSEMBLY LH


    1. Temporarily install the stabilizer link with the nut and bolt.

    2. A01EOX9E01

      Tighten the nut.

      Torque:
      128 N*m  { 1305 kgf*cm, 94 ft.*lbf }

  4. TEMPORARILY INSTALL FRONT STABILIZER LINK ASSEMBLY RH


    1. A01EQCTE01

      Temporarily install the stabilizer link with the nut and bolt.

    2. Tighten the nut.

      Torque:
      128 N*m  { 1305 kgf*cm, 94 ft.*lbf }

  5. TIGHTEN NO. 1 FRONT STABILIZER BRACKET LH


    1. A01EO1FE01

      Tighten the 2 bolts.

      Torque:
      87 N*m  { 887 kgf*cm, 64 ft.*lbf }

      Note

      Tighten the bolts in 3 steps, in the order shown in the illustration.

  6. TIGHTEN NO. 1 FRONT STABILIZER BRACKET RH


    1. A01ESL1E01

      Tighten the 2 bolts.

      Torque:
      87 N*m  { 887 kgf*cm, 64 ft.*lbf }

      Note

      Tighten the bolts in 3 steps, in the order shown in the illustration.

  7. INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY


    1. A01EN7K

      Install the No. 1 engine under cover with the 10 bolts.

      Torque:
      29 N*m  { 296 kgf*cm, 21 ft.*lbf }

  8. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH


    1. Push in the clip to install the front fender splash shield sub-assembly LH.

    2. Install the 3 bolts and 2 screws.

  9. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  10. STABILIZE SUSPENSION


    1. Install the front wheels.

      Torque:
      131 N*m  { 1336 kgf*cm, 97 ft.*lbf }

    2. Lower the vehicle.

    3. Press down on the vehicle several times to stabilize the suspension.

  11. TIGHTEN FRONT STABILIZER LINK ASSEMBLY LH


    1. A01EN25E01

      Tighten the bolt.

      Torque:
      135 N*m  { 1376 kgf*cm, 100 ft.*lbf }

      Note

      Perform this procedure with all 4 wheels on the ground.

  12. TIGHTEN FRONT STABILIZER LINK ASSEMBLY RH


    1. A01ER3BE01

      Tighten the bolt.

      Torque:
      135 N*m  { 1376 kgf*cm, 100 ft.*lbf }

      Note

      Perform this procedure with all 4 wheels on the ground.