ГЕНЕРАТОР ПОВТОРНАЯ СБОРКА


  1. INSTALL GENERATOR ROTOR ASSEMBLY


    1. A009AU5E01

      Using SST and a press, press in the generator rotor.

      SST
      09285-76010

    2. Place the washer on the generator rotor.

  2. INSTALL GENERATOR RECTIFIER END FRAME


    1. A0095PYE01
      Text in Illustration
      *1 17 mm Socket Wrench

      Using a 17 mm socket wrench and press, slowly press on the rectifier end frame.

    2. Install the cord clip and 4 nuts.

      Torque:
      5.9 N*m  { 60 kgf*cm, 52 in.*lbf }

  3. INSTALL GENERATOR HOLDER WITH RECTIFIER


    1. A0094ZQ

      Install the 4 rubber insulators to the lead wires.

      Text in Illustration
      A009BSG Inside

      Note

      Be careful to install the rubber insulators in the correct direction.

    2. A0096H2

      While pushing down on the rectifier holder, install it with the 4 screws.

      Torque:
      2.9 N*m  { 30 kgf*cm, 26 in.*lbf }
      Text in Illustration
      A009BSG Push

  4. INSTALL GENERATOR REGULATOR ASSEMBLY


    1. Install the regulator with the 3 screws.

      Torque:
      2.0 N*m  { 20 kgf*cm, 18 in.*lbf }

  5. INSTALL GENERATOR BRUSH HOLDER ASSEMBLY


    1. Install the plate seal.

    2. A009A0K

      Install the brush holder with the 2 screws.

      Torque:
      2.0 N*m  { 20 kgf*cm, 18 in.*lbf }
      Text in Illustration
      A009BSG Upper

    3. Install the brush holder cover.

  6. INSTALL GENERATOR REAR END COVER


    1. A0096DRE01
      Text in Illustration
      *1 Rectifier Plate

      Install the rear end cover and rectifier plate with the bolt and 3 nuts.

      Torque:
      for nut
      4.4 N*m  { 45 kgf*cm, 39 in.*lbf }
      for bolt
      3.9 N*m  { 40 kgf*cm, 35 in.*lbf }

    2. Install the terminal insulator with the nut.

      Torque:
      4.1 N*m  { 42 kgf*cm, 36 in.*lbf }

  7. INSTALL VACUUM PUMP ASSEMBLY


    1. Align the matchmarks and install the vacuum pump with the 4 bolts.

      Torque:
      7.8 N*m  { 80 kgf*cm, 69 in.*lbf }