СТАРТЕР СНЯТИЕ


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note


    • After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE REAR ENGINE UNDER COVER ASSEMBLY


    1. Remove the 4 bolts and rear engine under cover.

  3. DISCONNECT CLUTCH RELEASE CYLINDER ASSEMBLY


    1. A00O5T3

      Выверните два болта и отсоедините рабочий цилиндр сцепления.

  4. DISCONNECT CLUTCH FLEXIBLE HOSE BRACKET


    1. A00XFR1

      Remove the bolt and disconnect the clutch flexible hose bracket.

  5. REMOVE STARTER ASSEMBLY


    1. A00XJ3Q

      Disconnect the starter connector.

    2. Remove the terminal cap.

    3. Remove the nut and disconnect the starter wire.

    4. A00XJTK

      Remove the nut, 2 bolts and starter assembly.