ВЫПУСКНОЙ КОЛЛЕКТОР СНЯТИЕ


  1. REMOVE FRONT FENDER APRON SEAL RH


    1. A00L0IO

      Освободите 4 фиксаторов и снимите уплотнение фартука крыла.

  2. REMOVE FRONT NO. 1 FENDER APRON TO FRAME SEAL RH


    1. A00KZXC

      Освободите 5 фиксаторов и снимите уплотнение фартука крыла.

  3. REMOVE RESONATOR WITH AIR CLEANER CAP SUB-ASSEMBLY


    1. A0098PV

      Disconnect the sensor connector.

    2. Detach the wire harness clamp.

    3. Loosen the hose clamp and remove the resonator with air cleaner cap.

    4. A0099K2

      Detach the 4 hook clamps, and then remove the air cleaner cap and resonator with air cleaner cap.

  4. REMOVE INTAKE PIPE


    1. A0099HDE01

      Loosen the hose clamp and remove the 2 bolts and intake pipe.

  5. REMOVE FRONT EXHAUST PIPE ASSEMBLY


    1. Remove the bolt from the clamp.

    2. A00948C

      Remove the 2 bolts and No. 1 exhaust pipe support bracket.

    3. A009AS1

      Remove the 3 nuts and front exhaust pipe.

    4. Remove the gasket.

  6. REMOVE ENGINE OIL LEVEL DIPSTICK


    1. Remove the oil level dipstick.

  7. REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE


    1. Remove the 2 bolts, guide and O-ring.

  8. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR


    1. A0096YM

      Remove the 3 bolts and insulator.

  9. REMOVE EXHAUST MANIFOLD


    1. A009BTK

      Remove the 2 nuts, 6 bolts and manifold.

    2. Remove the gasket.