Click here

ДАТЧИК УРОВНЯ ТОПЛИВА В СБОРЕ УСТАНОВКА

Click here
Click here
  1. Click here

    INSTALL FUEL SENDER GAUGE ASSEMBLY


    1. A009BSBE01

      Set the fuel sender gauge on the fuel sub-tank. Then slide the fuel sender gauge downward to install it.

      Table 1. Text in Illustration
      *1 Fuel Sub-Tank
      A009BSG Slide

    2. Connect the fuel sender gauge connector.

  2. Click here

    INSTALL FUEL SENDER GAUGE ASSEMBLY (for Fuel Sub Tank)


    1. A00964IE01

      Set the fuel sender gauge on the fuel gauge support. Then slide the fuel sender gauge upward to install it.

      Table 2. Text in Illustration
      *1 Fuel Gauge Support
      A009BSG Slide
      Note:

      Make sure the part labeled A in the illustration is securely inserted into the hole of the fuel gauge support before sliding the fuel sender gauge upward.

    2. A009B9HE01

      Install the 2 lead wires with the 2 screws.

      2.0 N*m 20 kgf*cm 18 in.*lbf
      Table 3. Text in Illustration
      *1 Lead Wire (Black)
      *2 Lead Wire (Red)
      Note:

      Be sure to install the lead wires in the correct locations according to their color as shown in the illustration.

  3. Click here

    INSTALL FUEL TANK VENT TUBE ASSEMBLY


    1. for Single Tank Type:

      Install the fuel tank vent tube assembly (Click here).

    2. for Double Tank Type:


      1. for Fuel Main Tank:

        Install the fuel tank vent tube assembly (Click here).

      2. for Fuel Sub Tank:

        Install the fuel tank vent tube assembly (Click here).