Click here

ПРИВОДНОЙ РЕМЕНЬ СНЯТИЕ

Click here
Click here
  1. Click here

    REMOVE FRONT BUMPER COVER LOWER


    1. Remove the clip, 5 bolts and front bumper cover lower.

  2. Click here

    REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY


    1. Remove the 4 bolts.

    2. A00JXIF

      Unhook the engine under cover from the vehicle body as shown in the illustration.

  3. Click here

    REMOVE FRONT FENDER APRON SEAL RH


    1. Remove the 4 clips and fender apron seal.

  4. Click here

    REMOVE RESONATOR WITH AIR CLEANER CAP SUB-ASSEMBLY


    1. A0098PV

      Disconnect the sensor connector.

    2. Detach the wire harness clamp.

    3. Loosen the hose clamp and remove the resonator with air cleaner cap.

    4. A0099K2

      Detach the 4 hook clamps, and then remove the air cleaner cap and resonator with air cleaner cap.

  5. Click here

    REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

  6. Click here

    REMOVE AIR CLEANER CASE ASSEMBLY


    1. A00JYCZ

      Remove the 3 bolts and air cleaner case.

  7. Click here

    REMOVE VANE PUMP V BELT


    1. A009A8N

      Loosen bolt and nut, and remove the V belt.

  8. Click here

    REMOVE COOLER COMPRESSOR V BELT


    1. A009B8WE03

      Loosen nut and adjusting bolt, and remove the V belt.

      Table 1. Text in Illustration
      *1 Adjusting Bolt
  9. Click here

    REMOVE FAN AND GENERATOR V BELT


    1. A0099F1E03

      Loosen 2 bolts.

    2. Loosen adjusting bolt, and remove the V belt.

      Table 2. Text in Illustration
      *1 Adjusting Bolt