Click here

СИСТЕМА SFI ПРОЦЕДУРА ПОИСКА НЕИСПРАВНОСТЕЙ

Click here
Click here
Tip:

*: Use the intelligent tester.


  1. Click here

    VEHICLE BROUGHT TO WORKSHOP


    • NEXT
  2. Click here

    CUSTOMER PROBLEM ANALYSIS


    • NEXT
  3. Click here

    CONNECT INTELLIGENT TESTER TO DLC3

    Tip:

    If the display indicates a communication fault in the tester, inspect the DLC3.


    • NEXT
  4. Click here

    CHECK DTC AND FREEZE FRAME DATA*

    Tip:

    Record or print DTCs and freeze frame data, if necessary.


    • NEXT
  5. Click here

    CLEAR DTC AND FREEZE FRAME DATA*


    • NEXT
  6. Click here

    CONDUCT VISUAL INSPECTION


    • NEXT
  7. Click here

    SET CHECK MODE DIAGNOSIS*


    • NEXT
  8. Click here

    CONFIRM PROBLEM SYMPTOMS

    Tip:

    If the engine does not start, first perform the "Check DTC" procedures and "Conduct Basic Inspection" procedures below.

    Table 1. Result
    Result Proceed to
    Malfunction does not occur A
    Malfunction occurs B

    • B
    • GO TO STEP 10
    • A
  9. Click here

    SIMULATE SYMPTOMS


    • NEXT
  10. Click here

    CHECK DTC*

    Table 2. Result
    Result Proceed to
    Trouble code output A
    No code output B

    • B
    • GO TO STEP 12
    • A
  11. Click here

    REFER TO DTC CHART


    • NEXT
  12. Click here

    CONDUCT BASIC INSPECTION

    Table 3. Result
    Result Proceed to
    Malfunctioning parts not confirmed A
    Malfunctioning parts confirmed B

    • B
    • GO TO STEP 17
    • A
  13. Click here

    REFER TO PROBLEM SYMPTOMS TABLE

    Table 4. Result
    Result Proceed to
    Malfunctioning circuit confirmed A
    Malfunctioning parts confirmed B

    • B
    • GO TO STEP 17
    • A
  14. Click here

    CHECK ECM POWER SOURCE CIRCUIT


    • NEXT
  15. Click here

    CONDUCT CIRCUIT INSPECTION

    Table 5. Result
    Result Proceed to
    Malfunction not confirmed A
    Malfunction confirmed B

    • B
    • GO TO STEP 18
    • A
  16. Click here

    ПРОВЕРЬТЕ, НЕТ ЛИ ЭПИЗОДИЧЕСКИХ НЕИСПРАВНОСТЕЙ


    • NEXT
  17. Click here

    CONDUCT PARTS INSPECTION


    • NEXT
  18. Click here

    IDENTIFY PROBLEM


    • NEXT
  19. Click here

    ADJUST AND/OR REPAIR


    • NEXT
  20. Click here

    CONDUCT CONFIRMATION TEST


    • NEXT
    • END