REAR DOOR BELT MOULDING INSTALLATION


  1. INSTALL REAR DOOR BELT MOULDING


    1. A01CF2M

      Engage the guide.

    2. A01CG1A

      Engage the 8 claws to install a new rear door belt moulding.

      Tech Tips

      Engage the claws from the front side of the moulding.

  2. INSTALL REAR DOOR OUTSIDE MOULDING


    1. A01CBHX

      Engage the guide.

    2. Engage the 4 clips to install the rear door outside moulding.

    3. A01CDEO

      Connect the rear door glass run.

  3. INSTALL REAR DOOR WINDOW FRAME MOULDING

    Tech Tips

    When installing the rear door window frame moulding, heat the vehicle body and rear door window frame moulding using a heat light.

    Heating Temperature
    Item Temperature
    Vehicle Body 40 to 60°C (104 to 140°F)
    Moulding 20 to 30°C (68 to 86°F)

    Note

    Do not heat the vehicle body and rear door window frame moulding excessively.


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. A01CGILE01

      Install a new rear door window frame moulding.


      1. Using a heat light, heat the vehicle body and a new rear door window frame moulding.

      2. Remove the release paper from the face of the rear door window frame moulding.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Engage the 3 clips to install the rear door window frame moulding.