REAR DOOR BELT MOULDING REMOVAL


  1. REMOVE REAR DOOR WINDOW FRAME MOULDING

    Tech Tips

    When removing the rear door window frame moulding, heat the vehicle body and rear door window frame moulding using a heat light.

    Heating Temperature
    Item Temperature
    Vehicle Body 40 to 60°C (104 to 140°F)
    Moulding 20 to 30°C (68 to 86°F)

    Note

    Do not heat the vehicle body and rear door window frame moulding excessively.


    1. Fully open the rear door glass.

    2. Using a heat light, heat the rear door window frame moulding.

    3. A01CES2E01

      Using a moulding remover, remove the 3 clips and rear door window frame moulding.

  2. REMOVE REAR DOOR OUTSIDE MOULDING


    1. A01CDEO

      Remove the upper part of the rear door glass run to the extent that allows removal of the rear door outside moulding.

    2. A01CBHX

      Disengage the 4 clips.

    3. Disengage the guide and remove the rear door outside moulding.

  3. REMOVE REAR DOOR BELT MOULDING


    1. A01CF8PE01

      Put protective tape around the rear door belt moulding.

    2. A01CDQV

      Using a moulding remover, disengage the 8 claws.

      Tech Tips

      Disengage the claws from the rear side of the moulding.

    3. A01CF2M

      Disengage the guide and remove the rear door belt moulding.