Click here

FRONT BUMPER (for ALPHARD) DISASSEMBLY

Click here
Click here Click here
  1. Click here

    REMOVE NO. 1 ULTRASONIC SENSOR (for RH Side)


    1. A01CFDI

      Disconnect the connector.

    2. A01CEFS

      Disengage the 2 claws and remove the No. 1 ultrasonic sensor from the No. 1 ultrasonic sensor bezel.

  2. Click here

    REMOVE NO. 1 ULTRASONIC SENSOR (for LH Side)

    Tip:

    Use the same procedure as for the RH side.

  3. Click here

    REMOVE NO. 1 ULTRASONIC SENSOR BEZEL (for RH Side)


    1. A01CG3Y

      Disengage the 4 claws and remove the No. 1 ultrasonic sensor bezel from the front bumper assembly.

  4. Click here

    REMOVE NO. 1 ULTRASONIC SENSOR BEZEL (for LH Side)

    Tip:

    Use the same procedure as for the RH side.

  5. Click here

    REMOVE FOG LIGHT ASSEMBLY LH (w/ Fog Light)


    1. A01CFSQE01

      Disconnect the connector.

      Table 1. Text in Illustration
      *A for Standard
      *B for Sport Package

    2. Remove the screw.

    3. Disengage the 3 guides and remove the fog light assembly.

  6. Click here

    REMOVE FOG LIGHT ASSEMBLY RH (w/ Fog Light)

    Tip:

    Use the same procedure as for the LH side.

  7. Click here

    REMOVE HEADLIGHT WASHER COVER LH (w/ Headlight Cleaner System)


    1. A01CDER

      Disengage the guide and extend the headlight washer actuator sub-assembly.

    2. Disengage the 2 claws and remove the headlight washer cover.

  8. Click here

    REMOVE HEADLIGHT WASHER COVER RH (w/ Headlight Cleaner System)

    Tip:

    Use the same procedure as for the LH side.

  9. Click here

    REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH (w/ Headlight Cleaner System)


    1. A01CG89E01

      Push the tab shown by the arrow (A) and (B), disconnect the headlight cleaner hose.

    2. Remove the headlight cleaner clamp as shown in the illustration.

    3. A01CATLE01

      Pull down the headlight cleaner actuator clamp.

      Table 2. Text in Illustration
      *1 Headlight Cleaner Actuator Clamp - -

    4. Push the tab shown by the arrow (A) and disengage the claw as shown in the illustration, and disengage the guide to remove the headlight washer actuator sub-assembly as shown in the illustration.

  10. Click here

    REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH (w/ Headlight Cleaner System)

    Tip:

    Use the same procedure as for the LH side.

  11. Click here

    REMOVE FRONT BUMPER EXTENTION MOUNTING BRACKET (w/ Bracket)


    1. A01CBW6

      Remove the 2 screws and front bumper extention mounting bracket.

  12. Click here

    REMOVE NO. 1 HEADLIGHT CLEANER WASHER HOSE (w/ Headlight Cleaner System)


    1. A01CEL6

      Disengage the 7 clamps and remove the No. 1 headlight cleaner washer hose.

  13. Click here

    REMOVE NO. 4 ENGINE ROOM WIRE (for Standard)


    1. A01CBA8

      w/o Fog Light:


      1. Disconnect the 2 connectors.

      2. Disengage the 13 clamps and remove the No. 4 engine room wire.

    2. A01CBGM

      w/ Fog Light:


      1. Disengage the 13 clamps and remove the No. 4 engine room wire.

  14. Click here

    REMOVE NO. 4 ENGINE ROOM WIRE (for Sport Package)


    1. A01CF1U

      Disengage the 13 clamps and remove the No. 4 engine room wire.

  15. Click here

    REMOVE INNER RADIATOR GRILLE


    1. A01CE23

      Disengage the 12 claws and remove the inner radiator grille.

  16. Click here

    REMOVE LOWER NO. 1 RADIATOR GRILLE (for Standard)


    1. A01CEMV

      Disengage the 17 claws and remove the lower No. 1 radiator grille.

  17. Click here

    REMOVE LOWER NO. 1 RADIATOR GRILLE (for Sport Package)


    1. A01CEB3

      Disengage the 18 claws and remove the lower No. 1 radiator grille.

  18. Click here

    REMOVE FRONT BUMPER HOLE COVER LH (w/o Fog Light)


    1. A01CB65

      Remove the screw and 2 clips.

    2. Disengage the 5 claws and 2 guides, and remove the front bumper hole cover LH.

  19. Click here

    REMOVE FRONT BUMPER HOLE COVER RH (w/o Fog Light)

    Tip:

    Use the same procedure as for the LH side.

  20. Click here

    REMOVE FRONT BUMPER HOLE COVER ASSEMBLY LH (w/ Fog Light)


    1. A01CDXM

      for Standard:


      1. Remove the screw and 2 clips.

      2. Disengage the 5 claws and 2 guides, and remove the front bumper hole cover assembly LH.

    2. A01CFRA

      for Sport Package:


      1. Remove the screw and 2 clips.

      2. Disengage the 4 claws and 2 guides, and remove the front bumper hole cover assembly LH.

  21. Click here

    REMOVE FRONT BUMPER HOLE COVER ASSEMBLY RH (w/ Fog Light)

    Tip:

    Use the same procedure as for the LH side.

  22. Click here

    REMOVE FRONT BUMPER HOLE COVER


    1. A01CG2TE01

      Disengage the 2 claws.

      Table 3. Text in Illustration
      *1 Hook

    2. Disengage the hook and remove the front bumper hole cover from the front bumper cover.

      Tip:

      Use the same procedure for the RH side and LH side.

  23. Click here

    REMOVE FRONT BUMPER ENERGY ABSORBER


    1. A01CD5P

      Disengage the 4 guides and remove the front bumper energy absorber.

  24. Click here

    REMOVE FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY


    1. w/ Headlight Cleaner System:


      1. A01CE51

        Disengage the 3 clamps and disconnect the No. 2 headlight cleaner washer hose.

    2. A01CEJW

      Disengage the clamp and disconnect the ambient temperature sensor.

    3. Remove the 9 bolts and front bumper reinforcement sub-assembly.

  25. Click here

    REMOVE FRONT BUMPER SIDE SUPPORT LH


    1. A01CALEE01

      Remove the bolt and screw.

      Table 4. Text in Illustration
      *1 Bolt
      *2 Screw

    2. Disengage the 2 claws and remove the front bumper side support LH.

  26. Click here

    REMOVE FRONT BUMPER SIDE SUPPORT RH

    Tip:

    Use the same procedure as for the LH side.