Click here

RELAY ON-VEHICLE INSPECTION

Click here
Click here Click here
  1. Click here

    INSPECT HEADLIGHT RELAY (H-LP)


    1. A01CD1YE04

      Remove the headlight relay from the No. 2 engine room relay block.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Voltage is not applied between terminals 1 and 2 10 kΩ or higher
      3 - 5 Voltage is applied between terminals 1 and 2 Below 1 Ω

      If the result is not as specified, replace the relay.

  2. Click here

    INSPECT HEADLIGHT DIMMER RELAY (DIM)


    1. A01CD1YE04

      Remove the headlight dimmer relay from the No. 2 engine room relay block.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Voltage is not applied between terminals 1 and 2 10 kΩ or higher
      3 - 5 Voltage is applied between terminals 1 and 2 Below 1 Ω

      If the result is not as specified, replace the relay.

  3. Click here

    INSPECT FOG LIGHT RELAY (FOG)


    1. A01CG0EE86

      Remove the fog light relay from the No. 2 engine room relay block.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Voltage is not applied between terminals 1 and 2 10 kΩ or higher
      3 - 5 Voltage is applied between terminals 1 and 2 Below 1 Ω

      If the result is not as specified, replace the relay.

  4. Click here

    INSPECT REAR FOG LIGHT RELAY (RR FOG)


    1. A01CG0EE86

      Remove the rear fog light relay from the fusible link block assembly.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Voltage is not applied between terminals 1 and 2 10 kΩ or higher
      3 - 5 Voltage is applied between terminals 1 and 2 Below 1 Ω

      If the result is not as specified, replace the relay.