TURN SIGNAL FLASHER ASSEMBLY INSTALLATION


  1. INSTALL TURN SIGNAL FLASHER ASSEMBLY (for RHD)


    1. A01CB0N

      Connect the connector.

    2. Engage the claw to install the turn signal flasher assembly.

  2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL (for RHD)


    1. A01CAYP

      Engage the 3 guides and 14 claws.

      Tech Tips

      Make sure that all claws around the entire circumference of the driver side knee airbag assembly are fully engaged.

      Note

      Make sure that the claws are fully engaged.

    2. A01CCKN

      Install the lower instrument panel finish panel with the 3 screws <B>.

    3. A01CC11

      Engage the 3 claws and the fuel lid lock control cable assembly.

    4. A01CC18

      Engage the 3 claws and the hood lock control cable assembly.

  3. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)


    1. A01CE9Q

      Engage the 2 claws and DLC3.

    2. Engage the clamp.

    3. Connect the connector.

    4. A01CFFK

      Engage the 2 claws and 2 guides.

      Note

      Make sure that the claws are fully engaged.

    5. Install the No. 1 instrument panel under cover sub-assembly with the 2 screws <B>.

  4. INSTALL COWL SIDE TRIM BOARD RH (for RHD)


    1. A01CFL6

      Engage the 2 guides, claw and clip to install the cowl side trim board RH.

    2. Install the clip(A).

  5. INSTALL TURN SIGNAL FLASHER ASSEMBLY (for LHD)


    1. A01CAUB

      Connect the connector.

    2. Engage the clamp to install the turn signal flasher assembly.

  6. INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY (for LHD)

    Click here