AFS ECU INSTALLATION


  1. INSTALL AFS ECU


    1. A01CBNDE01

      Connect the connector.

    2. Engage the 2 stud bolts.

    3. Install the AFS ECU with the nut.

  2. INSTALL PASSENGER SIDE JUNCTION BLOCK


    1. A01CE91

      Install the passenger side junction block with the nut and bolt.

  3. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY


    1. A01CDTKE01

      With the glove compartment door assembly opened approximately 55° from its closed position, engage the 2 hinges horizontally.

      Note

      Engaging the hinges from the top will deform the hinges. Be sure to install the glove compartment door assembly horizontally.

    2. A01CDIJE01

      Slightly bend stoppers (A) and (B) in the directions indicated by the arrows in the illustration and engage the stoppers to install the glove compartment door assembly.

    3. Engage the claw and connect the glove compartment door stopper.

  4. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. Connect the connector.

    2. Engage the 2 guides.

      A01CFSFE01

    3. Engage the 4 claws to install the No. 2 instrument panel under cover sub-assembly.

      Note

      Make sure that the claws are fully engaged.

  5. INSTALL CENTER FLOOR CARPET COVER LH (for RHD)


    1. A01CF5Y

      Engage the 4 claws.

    2. A01CG2A

      Install the center floor carpet cover LH with the clip.

  6. INSTALL CENTER FLOOR CARPET COVER RH (for LHD)


    1. A01CB02

      Engage the 5 claws.

    2. A01CBO2

      Install the center floor carpet cover RH with the clip.

  7. HEIGHT CONTROL SENSOR SIGNAL INITIALIZATION

    Click here

  8. ADJUST HEADLIGHT AIMING (for ALPHARD)

    Click here

  9. ADJUST HEADLIGHT AIMING (for VELLFIRE)

    Click here