Click here

FRONT BUMPER (for ALPHARD) REMOVAL

Click here
Click here Click here
  1. Click here

    REMOVE RADIATOR COVER SUB-ASSEMBLY


    1. A01CDEV

      Using a clip remover, remove the 4 clips and radiator cover sub-assembly.

  2. Click here

    REMOVE RADIATOR GRILLE ASSEMBLY


    1. A01CCNQE01

      Put protective tape around the radiator grille assembly.

      Table 1. Text in Illustration
      *1 Protective Tape
    2. A01CBLP

      Remove the 4 screws.

    3. Disengage the 8 claws.

    4. Disconnect the connector and remove the radiator grille assembly.

  3. Click here

    REMOVE FRONT BUMPER ASSEMBLY (for Standard)


    1. A01CAQOE01

      Put protective tape around the front bumper assembly.

      Table 2. Text in Illustration
      *1 Protective Tape
    2. A01CB6S

      Remove the 4 bolts.

    3. Using a clip remover, remove the 7 clips.

    4. A01CDY8E01

      Remove the screw.

      Tip:

      Use the same procedure for the RH side and LH side.

    5. Using a screwdriver, turn the pin 90 degrees and remove the pin hold clip.

      Tip:

      Use the same procedure for the RH side and LH side.

    6. A01CB3C

      Disengage the 3 claws.

      Tip:

      Use the same procedure for the RH side and LH side.

    7. w/ Headlight Cleaner System:


      1. Remove the front bumper extention mounting bracket. (Click here)

      2. A01CC6Q

        Disconnect the No. 1 headlight cleaner washer hose.

        Tip:

        Use a container to collect the washer fluid.

    8. Disconnect the connector.

    9. A01CC4C

      Disengage the 2 guides and remove the front bumper assembly.

  4. Click here

    REMOVE FRONT BUMPER ASSEMBLY (for Sport Package)


    1. A01CCOOE01

      Put protective tape around the front bumper assembly.

      Table 3. Text in Illustration
      *1 Protective Tape
    2. A01CFDC

      Remove the 4 bolts.

    3. Using a clip remover, remove the 7 clips.

    4. A01CDY8E01

      Remove the screw.

      Tip:

      Use the same procedure for the RH side and LH side.

    5. Using a screwdriver, turn the pin 90 degrees and remove the pin hold clip.

      Tip:

      Use the same procedure for the RH side and LH side.

    6. A01CFGO

      Disengage the 3 claws.

      Tip:

      Use the same procedure for the RH side and LH side.

    7. Disconnect the connector.

    8. A01CG1C

      Disengage the 2 guides and remove the front bumper assembly.