REAR LIGHT ASSEMBLY (for VELLFIRE) ON-VEHICLE INSPECTION


  1. INSPECT REAR LIGHT ASSEMBLY


    1. A01CF1FE16

      Disconnect the connector from the rear light assembly.

    2. Measure the voltage according to the value(s) in the table below.

      Standard Voltage
      LH Side
      Tester Connection Condition Specified Condition
      U15-1 - U15-2 Light control switch in TAIL 11 to 14 V
      Light control switch off Below 1 V
      RH Side
      Tester Connection Condition Specified Condition
      U4-1 - U4-2 Light control switch in TAIL 11 to 14 V
      Light control switch off Below 1 V

      If the result is not as specified, repair or replace the wire harness or connector.