REAR COMBINATION LIGHT ASSEMBLY (for ALPHARD) REASSEMBLY


  1. INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY


    1. A01CGI3

      Engage the clamp to install the rear combination light socket and wire sub-assembly.

    2. Connect the 2 connectors.

    3. A01CAKW

      Install the packing.

  2. INSTALL TAIL LIGHT BULB


    1. Install the tail light bulb to the rear combination light socket and wire sub-assembly.

    2. A01CDQ3

      Turn the tail light bulb and the rear combination light socket and wire in the direction indicated by the arrow as shown in the illustration to install them as a unit.

  3. INSTALL REAR TURN SIGNAL LIGHT BULB


    1. Install the rear turn signal light bulb to the rear turn signal light socket.

    2. A01CEX9

      Turn the rear turn signal light bulb and rear turn signal light socket in the direction indicated by the arrow as shown in the illustration to install them as a unit.

    3. A01CCE4

      Turn the back cover to install it.

  4. INSTALL REAR COMBINATION LIGHT BODY PACKING


    1. Install a new rear combination light body packing.

  5. INSTALL REAR COMBINATION LIGHT BODY GASKET


    1. A01CFW7

      Install a new rear combination light body gasket.