HEADLIGHT CLEANER SWITCH INSTALLATION


  1. INSTALL HEADLIGHT CLEANER SWITCH ASSEMBLY


    1. A01CC4Q

      Engage the 2 claws to install the headlight cleaner switch assembly as shown in the illustration.

  2. INSTALL NO. 1 SWITCH HOLE BASE


    1. Connect each connector.

    2. Engage the 6 claws and 3 guides to install the No. 1 switch hole base.

      A01CFWGE01

  3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL


    1. A01CE7K

      Engage the 3 guides, 13 claws and clip.

      Tech Tips

      Make sure that all claws around the entire circumference of the driver side knee airbag assembly are fully engaged.

      Note

      Make sure that the claws are fully engaged.

    2. A01CCWL

      Install the lower instrument panel finish panel with the 3 screws <B>.

    3. A01CGDM

      Connect the fuel filler opening lid lock sub-assembly to the fuel lid lock open lever sub-assembly.

    4. A01CCXK

      Engage the 3 claws and the fuel lid lock control cable assembly.

    5. A01CF0E

      Engage the 3 claws and the hood lock control cable assembly.

  4. INSTALL COWL SIDE TRIM BOARD LH


    1. A01CCIK

      Engage the 2 guides, claw and clip to install the cowl side trim board LH.

    2. Install the clip(A).

  5. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. Engage the clamp.

    2. Connect each connector.

    3. A01CCYO

      Engage the 2 claws and guide.

      Note

      Make sure that the claws are fully engaged.

    4. Install the No. 1 instrument panel under cover sub-assembly with the 2 screws <B>.

  6. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH


    1. Connect the connector.

    2. A01CDHT

      Engage the 4 claws to install the No. 1 instrument cluster finish panel garnish.

  7. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL


    1. A01CEO2

      Engage the 11 claws and 2 guides to install the No. 1 instrument cluster finish panel.

    2. A01CDZ6E01

      Remove the protective tape from the steering column cover.