WASHER MOTOR (for Rear Side) REMOVAL


  1. REMOVE FENDER PANEL MUDGUARD SUB-ASSEMBLY (for Standard)


    1. A01CF6T

      Remove the screw.

    2. Using a clip remover, remove the clip.

    3. Disengage the clip and remove the fender panel mudguard sub-assembly.

    4. Remove the clip (No. 4 side mudguard retainer) from the fender panel mudguard sub-assembly.

  2. REMOVE FENDER PANEL MUDGUARD SUB-ASSEMBLY (for Sport Package)


    1. A01CBWL

      Remove the 2 screws.

    2. Using a clip remover, remove the clip.

    3. Disengage the 2 clips and remove the fender panel mudguard sub-assembly.

    4. Remove the 2 clips (No. 4 side mudguard retainer) from the fender panel mudguard sub-assembly.

  3. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY


    1. A01CAU9

      Using a screwdriver, turn the pin 90 degrees and remove the pin hold clip.

    2. A01CEBA

      Using a clip remover, remove the 10 clips, 7 screws and front fender splash shield sub-assembly.

  4. DRAIN WASHER FLUID


    1. A01CGFJ

      Disconnect the washer hose from the rear washer motor and pump assembly, and drain the washer fluid.

      Tech Tips

      Use a container to collect the washer fluid.

  5. REMOVE REAR WASHER MOTOR AND PUMP ASSEMBLY


    1. A01CAYK

      Disconnect the connector.

    2. Remove the rear washer motor and pump assembly.

      Tech Tips

      Use a container to collect the washer fluid.