FRONT WIPER MOTOR REMOVAL


  1. REMOVE WINDSHIELD WIPER ARM COVER


    1. A01CBB7E01

      Using a screwdriver, disengage the 2 claws and remove the 2 windshield wiper arm covers.

      Tech Tips

      Tape the screwdriver tip before use.

  2. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH


    1. A01CEJI

      Remove the nut and the front wiper arm and blade assembly RH.

  3. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH


    1. A01CB95

      Remove the nut and the front wiper arm and blade assembly LH.

  4. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY


    1. A01CFAO

      Remove the 2 clips.

    2. A01CBJT

      Disengage the 15 claws and 2 guides, and remove the cowl top ventilator louver sub-assembly as shown in the illustration.

  5. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY


    1. A01CAUN

      Disconnect the connector.

    2. A01CDAS

      Remove the 3 bolts and the windshield wiper motor and link assembly as shown in the illustration.

  6. REMOVE FRONT WIPER CRANK SUB-ASSEMBLY


    1. A01CEXFE01

      Using a screwdriver, separate the No. 1 rod from the crank arm pivot of the front wiper crank sub-assembly as shown in the illustration.

      Tech Tips

      Tape the screwdriver tip before use.

    2. A01CFN7

      Remove the nut and the front wiper crank sub-assembly.

  7. REMOVE WINDSHIELD WIPER MOTOR ASSEMBLY


    1. A01CB35

      Disconnect the connector.

    2. A01CBVY

      Remove the 3 bolts and the windshield wiper motor assembly.

    3. A01CCI2E01

      Cut the clamp to remove it.

    4. Remove the wire harness.