OUTER MIRROR CONTROL ECU REMOVAL


  1. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH RH


    1. A01CBQR

      Disengage the 2 clips and guide, and remove the front door lower frame bracket garnish.

  2. REMOVE LOWER DOOR FRAME GARNISH RH


    1. A01CFQ1

      Disengage the 3 clips and remove the lower door frame garnish.

  3. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG RH


    1. A01CDV8

      Using a moulding remover, disengage the 3 claws, and remove the front door inside handle bezel plug.

  4. REMOVE COURTESY LIGHT ASSEMBLY


    1. A01CATKE01

      Using a moulding remover, disengage the claw.

    2. Disconnect the connector and remove the courtesy light assembly.

  5. REMOVE FRONT DOOR PULL HANDLE RH


    1. A01CBNYE01

      Using a screwdriver with the tip wrapped with protective tape, disengage the claw and open the cover.

    2. A01CDYE

      Remove the screw.

    3. Disengage the 3 claws and remove the front door pull handle.

  6. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL


    1. A01CCX2

      Using a moulding remover, disengage the 9 claws and remove the power window regulator master switch assembly with front door armrest base panel.

    2. Disconnect the connector.

  7. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY RH


    1. A01CGBP

      Remove the 2 screws.

    2. Using a clip remover, disengage the 12 clips.

    3. Pull out the front door trim board in the direction indicated by the arrow shown in the illustration.

    4. Raise the front door trim board and remove the front door trim board together with the front door inner glass weatherstrip.

    5. for Driver Side with Memory:


      1. Disconnect the connector.

    6. A01CBN8

      Disengage the 2 claws and disconnect the front door inside handle sub-assembly.

  8. REMOVE OUTER MIRROR CONTROL ECU ASSEMBLY


    1. A01CCK8

      Disconnect the 2 connectors.

    2. Remove the 2 screws and the outer mirror control ECU assembly.