OUTER MIRROR SWITCH (for RHD) INSPECTION

INSPECT OUTER MIRROR SWITCH ASSEMBLY (w/o Automatic Retractable Mirror)

1. 

   Text in Illustration

   *1	Component without harness connected (Outer Mirror Switch Assembly)

   Check the switch functions.

   
   

   1. For the L position of the mirror select switch:

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection Switch Condition Specified Condition I14-6 (M+) - I14-12 (E) Mirror adjust switch pressed up Below 1 Ω I14-9 (VL) - I14-11 (B) Mirror adjust switch pressed up Below 1 Ω I14-6 (M+) - I14-11 (B) Mirror adjust switch pressed down Below 1 Ω I14-9 (VL) - I14-12 (E) Mirror adjust switch pressed down Below 1 Ω I14-6 (M+) - I14-12 (E) Mirror adjust switch pressed left Below 1 Ω I14-10 (HL) - I14-11 (B) Mirror adjust switch pressed left Below 1 Ω I14-6 (M+) - I14-11 (B) Mirror adjust switch pressed right Below 1 Ω I14-10 (HL) - I14-12 (E) Mirror adjust switch pressed right Below 1 Ω I14-6 (M+) - I14-11 (B) Mirror adjust switch not pressed 10 kΩ or higher

      If the result is not as specified, replace the outer mirror switch assembly.

   2. For the R position of the mirror select switch:

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection Switch Condition Specified Condition I14-6 (M+) - I14-12 (E) Mirror adjust switch pressed up Below 1 Ω I14-8 (VR) - I14-11 (B) Mirror adjust switch pressed up Below 1 Ω I14-6 (M+) - I14-11 (B) Mirror adjust switch pressed down Below 1 Ω I14-8 (VR) - I14-12 (E) Mirror adjust switch pressed down Below 1 Ω I14-6 (M+) - I14-12 (E) Mirror adjust switch pressed left Below 1 Ω I14-7 (HR) - I14-11 (B) Mirror adjust switch pressed left Below 1 Ω I14-6 (M+) - I14-11 (B) Mirror adjust switch pressed right Below 1 Ω I14-7 (HR) - I14-12 (E) Mirror adjust switch pressed right Below 1 Ω I14-6 (M+) - I14-11 (B) Mirror adjust switch not pressed 10 kΩ or higher

2. 

   Text in Illustration

   *1	Component without harness connected (Outer Mirror Switch Assembly)

   Check that the LED illuminates.

   
   

   1. Apply battery voltage to the outer mirror switch assembly and check that the LED illuminates.

      OK
      Tester Connection Specified Condition Battery positive (+) → I14-15 (ILL+) Battery negative (-) → I14-16 (ILL-) LED illuminates

      If the result is not as specified, replace the outer mirror switch assembly.

INSPECT OUTER MIRROR SWITCH ASSEMBLY (w/ Automatic Retractable Mirror)

1. 

   Text in Illustration

   *1	Component without harness connected (Outer Mirror Switch Assembly)
   *2	Mirror Select switch

   Check the switch functions.

   
   

   1. For the L position of the mirror select switch:

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection Switch Condition Specified Condition I8-16 (M+) - I8-13 (E) Mirror adjust switch pressed up 95 to 105 Ω Mirror adjust switch pressed down 446 to 493 Ω Mirror adjust switch pressed left 760 to 840 Ω Mirror adjust switch pressed right 237 to 262 Ω Mirror adjust switch not pressed 10 kΩ or higher I8-11 (MSW) - I8-13 (E) Mirror select switch L 95 to 105 Ω Mirror select switch off 10 kΩ or higher

      If the result is not as specified, replace the outer mirror switch assembly.

   2. For the R position of the mirror select switch:

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection Switch Condition Specified Condition I8-16 (M+) - I8-13 (E) Mirror adjust switch pressed up 95 to 105 Ω Mirror adjust switch pressed down 446 to 493 Ω Mirror adjust switch pressed left 760 to 840 Ω Mirror adjust switch pressed right 237 to 262 Ω Mirror adjust switch not pressed 10 kΩ or higher I8-11 (MSW) - I8-13 (E) Mirror select switch R Below 1 Ω Mirror select switch off 10 kΩ or higher

      If the result is not as specified, replace the outer mirror switch assembly.

2. 

   Text in Illustration

   *1	Component without harness connected (Outer Mirror Switch)

   Check that the LED illuminates.

   
   

   1. Apply battery voltage to the outer mirror switch assembly and check that the LED illuminates.

      OK
      Measurement Condition Specified Condition Battery positive (+) → I8-18 (ILL+) Battery negative (-) → I8-20 (ILL-) LED illuminates

      If the result is not as specified, replace the outer mirror switch assembly.

INSPECT OUTER MIRROR RETRACTABLE SWITCH (w/ Automatic Retractable Mirror)

1. 

   Text in Illustration

   *1	Component without harness connected (Outer Mirror Retractable Switch)

   Check that the switch functions.

   
   

   1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition G46-3 (MAT) - G46-4 (E) AUTO position Below 1 Ω Except AUTO position 10 kΩ or higher G46-4 (E) - G46-2 (MR) Retract position Below 1 Ω Except retract position 10 kΩ or higher

      If the result is not as specified, replace the outer mirror retractable switch.

2. 

   *1	Component without harness connected (Outer Mirror Retractable Switch)

   Check that the LED illuminates.

   
   

   1. Apply battery voltage to the outer mirror retractable switch and check that the LED illuminates.

      Measurement Condition Specified Condition Battery positive (+) → G46-5 (ILL+) Battery negative (-) → G46-1 (ILL-) LED illuminates

      If the result is not as specified, replace the outer mirror retractable switch.