OUTER MIRROR SWITCH (for LHD) INSTALLATION


  1. INSTALL OUTER MIRROR SWITCH ASSEMBLY


    1. Engage the 4 claws to install the outer mirror switch assembly.

  2. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL

    Tech Tips

    Use the same procedure as for the RH side Click here.

  3. INSTALL FRONT DOOR PULL HANDLE LH

    Tech Tips

    Use the same procedure as for the RH side Click here.

  4. INSTALL RETRACTABLE OUTER MIRROR SWITCH


    1. Engage the 2 claws to install the outer mirror retractable switch.

  5. INSTALL NO. 1 SWITCH HOLE BASE

    Tech Tips

    Use the same procedure as for the RH side Click here.

  6. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL


    1. A01CE7K

      Engage the 3 guides, 13 claws and clip.

      Tech Tips

      Make sure that all claws around the entire circumference of the driver side knee airbag assembly are fully engaged.

      Note

      Make sure that the claws are fully engaged.

    2. A01CCWL

      Install the lower instrument panel finish panel with the 3 screws <B>.

    3. A01CGDM

      Connect the fuel filler opening lid lock sub-assembly to the fuel lid lock open lever sub-assembly.

    4. A01CCXK

      Engage the 3 claws and the fuel lid lock control cable assembly.

    5. A01CF0E

      Engage the 3 claws and the hood lock control cable assembly.

  7. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. Engage the clamp.

    2. Connect each connector.

    3. A01CCYO

      Engage the 2 claws and guide.

      Note

      Make sure that the claws are fully engaged.

    4. Install the No. 1 instrument panel under cover sub-assembly with the 2 screws <B>.

  8. INSTALL COWL SIDE TRIM BOARD LH


    1. A01CCIK

      Engage the 2 guides, claw and clip to install the cowl side trim board LH.

    2. Install the clip(A).

  9. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH

    Tech Tips

    Use the same procedure as for the RH side Click here.

  10. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL

    Tech Tips

    Use the same procedure as for the RH side Click here.