Click here

OUTER REAR VIEW MIRROR GLASS REMOVAL

Click here
Click here Click here
  1. Click here

    REMOVE OUTER MIRROR GLASS


    1. A01CAUHE01

      Push in the upper side of the mirror surface to tilt it.

    2. Apply protective tape as shown in the illustration.

    3. A01CBU7E01

      Using a screwdriver with its tip wrapped with protective tape, disengage the claw as shown in the illustration.

      Note:

      Do not pull the outer mirror RH with excessive force. Doing so may cause the actuator to come off or break the mirror surface.

    4. A01CF5LE01

      Using a screwdriver with its tip wrapped with protective tape, disengage the 3 claws as shown in the illustration.

    5. A01CBET

      Disconnect each connector, and remove the outer mirror RH.