Click here

OUTER REAR VIEW MIRROR INSTALLATION

Click here
Click here Click here
  1. Click here

    INSTALL OUTER REAR VIEW MIRROR ASSEMBLY


    1. A01CCH4

      Engage the claw and install the outer rear view mirror assembly with the 3 nuts.

      8.0 N*m 82 kgf*cm 71 in.*lbf

    2. Connect the connector.

  2. Click here

    INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY


    1. for Driver Side with Memory:


      1. Connect the connector.

    2. A01CCLL

      Engage the 12 clips and install the front door trim board sub-assembly to the front door panel.

    3. Install the 2 screws.

  3. Click here

    INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side)


    1. Connect the connector.

    2. A01CF7S

      Engage the 9 claws to install the power window regulator master switch assembly with front door armrest base panel.

  4. Click here

    INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side)


    1. A01CDUJ

      Connect the connector.

    2. Engage the 9 claws to install the power window regulator switch assembly with front door armrest base panel.

  5. Click here

    INSTALL FRONT DOOR PULL HANDLE


    1. A01CDYE

      Engage the 3 claws.

    2. Install the front door pull handle with the screw.

    3. A01CCQE

      Engage the claw and close the cover.

  6. Click here

    INSTALL COURTESY LIGHT ASSEMBLY


    1. Connect the connector.

    2. A01CCM7E01

      Engage the claw to install the courtesy light assembly.

  7. Click here

    INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG


    1. A01CBSH

      Engage the 3 claws to install the front door inside handle bezel plug.

  8. Click here

    INSTALL LOWER DOOR FRAME GARNISH


    1. A01CFQ1

      Engage the 3 clips to install the lower door frame garnish.

  9. Click here

    INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH


    1. A01CBQR

      Engage the guide and 2 clips to install the front door lower frame bracket garnish.

  10. Click here

    INSTALL SIDE TURN SIGNAL LIGHT ASSEMBLY


    1. A01CDJ3

      Connect the connector.

    2. Install the side turn signal light assembly with the 2 screws.

  11. Click here

    INSTALL OUTER MIRROR COVER


    1. A01CC56

      Align the end of the outer mirror cover RH on the side turn signal light assembly RH side to the outer rear view mirror assembly RH.

    2. A01CF1X

      Engage the 8 claws to install the outer mirror cover RH as shown in the illustration.

  12. Click here

    INSTALL OUTER MIRROR GLASS


    1. Connect each connector.

    2. Position the plate pivot horizontally.

    3. A01CG7K

      Engage the 2 claws.

      Note:

      Do not push in the outer mirror RH with excessive force. Doing so may break the mirror surface.

    4. A01CB0Z

      Engage the 2 claws to install the outer mirror RH.

      Note:

      Do not push in the outer mirror RH with excessive force. Doing so may break the mirror surface.