WIPER SWITCH REMOVAL


  1. REMOVE LOWER STEERING COLUMN COVER

    Note

    Removing the lower steering column cover in the incorrect order will cause the lower steering column cover to break.


    1. Release the tilt and telescopic lever, and fully extend and lower the steering column assembly.

    2. Lock the tilt and telescopic lever.

    3. A01CB3H

      Push the right and left sides of the lower steering column cover, and disengage the 2 claws.

      Note

      Completely disengage the claws.

    4. A01CAOR

      Insert your fingers into the opening of the tilt lever of the lower steering column cover to disengage the claw.

      Tech Tips

      Spread the claw to disengage it.

    5. A01CB9ZE01

      Using a screwdriver, insert the tip into each service hole to disengage the 2 claws, and remove the lower steering column cover as shown in the illustration.

      Tech Tips

      Tape the screwdriver tip before use.

  2. REMOVE UPPER STEERING COLUMN COVER


    1. A01CFAE

      Disengage the claw and 2 pins, and separate the upper steering column cover from the steering column assembly.

    2. A01CDTB

      Disengage the 4 clips and 2 claws, and remove the upper steering column cover from the lower instrument cover.

  3. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY


    1. A01CEZO

      Disconnect the 2 connectors.

    2. Disengage the claw and remove the windshield wiper switch assembly.