FRONT WIPER RUBBER REPLACEMENT


  1. REMOVE FRONT WIPER BLADE


    1. Disengage the holder on the front wiper blade.

      A01CF1VE01

    2. Remove the front wiper blade from the front wiper arm as shown in the illustration.

      Note

      Do not lower the front wiper arm with the front wiper blade removed. The arm tip could damage the windshield surface.

  2. REMOVE WIPER RUBBER LH


    1. A01CBD1

      Remove the wiper rubber and the 2 wiper rubber backing plates from the front wiper blade.

    2. A01CCFLE01

      Remove the 2 wiper rubber backing plates from the wiper rubber.

  3. REMOVE WIPER RUBBER RH


    1. A01CBD1

      Remove the wiper rubber and the 2 wiper rubber backing plates from the front wiper blade.

    2. A01CE9JE01

      Remove the 2 wiper rubber backing plates from the wiper rubber.

  4. INSTALL WIPER RUBBER LH


    1. A01CAZQE01

      Install the 2 wiper rubber backing plates to the wiper rubber.

      Note


      • Align the protrusions on the wiper rubber with the notches in the backing plates.

      • Align the curves of the backing plates with the curve of the glass.

    2. A01CC0H

      Install the wiper rubber and the 2 wiper rubber backing plates to the front wiper blade with the tip of the rubber (curved end) facing the axis of the wiper arm.

      Tech Tips

      Firmly push the wiper rubber into the wiper blade to securely engage them.

  5. INSTALL WIPER RUBBER RH


    1. A01CAKEE01

      Install the 2 wiper rubber backing plates to the wiper rubber.

      Note


      • Align the protrusions on the wiper rubber with the notches in the backing plates.

      • Align the curves of the backing plates with the curve of the glass.

    2. A01CC0H

      Install the wiper rubber and the 2 wiper rubber backing plates to the front wiper blade with the tip of the rubber (curved end) facing the axis of the wiper arm.

      Tech Tips

      Firmly push the wiper rubber into the wiper blade to securely engage them.

  6. INSTALL FRONT WIPER BLADE


    1. Install the front wiper blade as shown in the illustration.

      A01CD4PE01

    2. Engage the holder on the front wiper blade.