Click here

POWER BACK DOOR DRIVE UNIT REMOVAL

Click here
Click here Click here
  1. Click here

    REMOVE REAR DOOR SCUFF PLATE LH

    Tip:

    Use the same procedure for the RH side and LH side (Click here).

  2. Click here

    DISCONNECT NO. 1 SLIDE DOOR WEATHERSTRIP LH

  3. Click here

    REMOVE BACK DOOR STRIKER COVER


    1. A01CDGVE02

      Using a screwdriver, disengage the 4 claws and 2 guides, and remove the back door striker cover.

      Table 1. Text in Illustration
      *1 Protective Tape
      Tip:

      Tape the screwdriver tip before use.

  4. Click here

    REMOVE BACK DOOR SCUFF PLATE


    1. A01CCY0

      Remove the 4 claws, 4 clips and 2 guides, and remove the back door scuff plate.

  5. Click here

    ADJUST REAR NO. 2 SEAT ASSEMBLY LH

    Tip:

    Use the same procedure for the RH side and LH side (Click here).

  6. Click here

    REMOVE RECLINING ADJUSTER RELEASE HANDLE LH

    Tip:

    Use the same procedure for the RH side and LH side (Click here).

  7. Click here

    REMOVE UPPER SEAT TRACK RAIL COVER LH

    Tip:

    Use the same procedure for the RH side and LH side (Click here).

  8. Click here

    REMOVE NO. 1 SEAT TRACK LOCK PLATE COVER

    Tip:

    Use the same procedure for the RH side and LH side (Click here).

  9. Click here

    REMOVE REAR NO. 2 SEAT ASSEMBLY LH

    Tip:

    Use the same procedure for the RH side and LH side (Click here).

  10. Click here

    REMOVE NO. 2 LUGGAGE COMPARTMENT TRIM HOOK

    Tip:

    Use the same procedure for the No. 2 luggage compartment trim hook and No. 1 luggage compartment trim hook (Click here).

  11. Click here

    REMOVE ROPE HOOK ASSEMBLY

    Tip:

    Use the same procedure for the RH side and LH side (Click here).

  12. Click here

    REMOVE LUGGAGE COMPARTMENT TRIM INNER COVER (for 60/40 Split Seat Type)

    Tip:

    Use the same procedure for the RH side and LH side (Click here).

  13. Click here

    DISCONNECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY (for 60/40 Split Seat Type)

    Tip:

    Use the same procedure for the RH side and LH side (Click here).

  14. Click here

    REMOVE DECK SIDE GARNISH LH


    1. A01CD2TE01

      Disengage the 12 claws and 4 guides, and remove the deck side garnish LH as shown in the illustration.

  15. Click here

    REMOVE REAR QUARTER TRIM PANEL ASSEMBLY LH


    1. Remove the clip.

    2. A01CEOA

      Disengage the 15 clips, 8 claws and 2 guides, and remove the rear quarter trim panel assembly LH.

  16. Click here

    REMOVE BACK DOOR CENTER GARNISH


    1. A01CDVZ

      Using a moulding remover C, disengage the 6 clips and 4 claws, and remove the back door center garnish.

  17. Click here

    REMOVE BACK DOOR NO. 2 SERVICE HOLE COVER


    1. A01CAW9

      Disengage the 3 claws and remove the back door No. 2 service hole cover.

  18. Click here

    REMOVE REAR WINDOW SIDE GARNISH LH


    1. A01CEXNE01

      Disengage the 3 clips and 2 claws, and remove the rear window side garnish LH.

  19. Click here

    DISCONNECT POWER BACK DOOR ROD


    1. A01CFMW

      Remove the 2 bolts and disconnect the power back door rod.

  20. Click here

    REMOVE REAR SEAT HOOK SUB-ASSEMBLY LH

    Tip:

    Use the same procedure for the RH side and LH side (Click here).

  21. Click here

    DISCONNECT REAR NO. 2 SEAT OUTER BELT ASSEMBLY LH

    Tip:

    Use the same procedure for the RH side and LH side (Click here).

  22. Click here

    REMOVE UPPER ROOF SIDE INNER GARNISH LH


    1. A01CCEU

      Disengage the 2 clips, claw and guide, and remove the upper roof side inner garnish LH as shown in the illustration.

  23. Click here

    REMOVE BACK DOOR MOTOR UNIT


    1. A01CE1D

      Disconnect the connector.

    2. Remove the 4 bolts and back door motor unit.